[Guide] Flash Stock ROM | Firmware on Android Lenovo VIBE K4 NOTE Using SP Flash Tool.

Flash Stock Firmware Lenovo VIBE K4 NOTE. This device also known as Lenovo K4 Note A7010a48, A7010, Lenovo Vibe X3 Lite, And this guide will show you how to Flash Stock ROM or Firmware Android Lenovo VIBE K4 NOTE Using SP Flash Tool. guidebelajar is not responsible for any phone damage which is incurred during Custom ROMs flashing process. Thanks for Shakib123 for this Stock ROM.

Lenovo VIBE K4 NOTE is device released on 2014, January. comes with 5,5 Inchi IPS LCD capacitive touchscreen, 16M colors, Android OS, v5.1.1 (Lollipop), upgradable to v6.0 (Marshmallow) and supported with Mediatek MT6753 chipset, Octa-core 1.3 GHz Cortex-A53 CPU, GPU Mali-T720MP3, combined with 3 GB of RAM and 13 MP of Main camera and 5 MP on secondary camera.

Prepare this before flash Lenovo VIBE K4 NOTE.

Make sure you have backup all data and file stored on Internal memory Lenovo VIBE K4 NOTE
Make sure you have at least 80% of battery capacity.
Download USB VCOM Driver Here.
Download SP Flash Tool 5.1532. Here or you can download the latest SP Flah tool from http://spflashtool.com/
Download Lenovo VIBE K4 NOTE Stock Firmware. Here or Here

Guide to Install Stock ROM on Lenovo VIBE K4 NOTE.

You must download SP Flash Tools and the custom ROM from download link above.
Install USB Driver first on your computer, the driver will be auto installer. Then go to ;

↦ My Computer
↦ Manage
↦ Device Manager you should see MediaTek Preloader USB VCOM Port (COMxx) on port list.

mediatek preloader USB Vcom driver

Then, extract SP Flash tool on the specific folder on your computer, we recommended you exract it on desktop.
Then remove your Sim card and SD Card if installed.
Next, Connect your Lenovo VIBE K4 NOTE to Computer, while holding the power button and volume up. The PC will detect the new hardware, just ignore it.
Open SP flash tool software and click scatter load. find Lenovo VIBE K4 NOTE scatter storage location earlier. (on desktop).
MT6752 scatter
In the Scatter Loading field go to the folder where you extracted the Flash Tool and select target_bin
Flash / Install Firmware Lenovo VIBE K4 NOTE.
Then you click options ->Download -> then check DA DL all with checksum.
Flash / Install Firmware Lenovo VIBE K4 NOTE.
On download tab, ensure you have selected download only option from dropdown menu, see below picture.
Flash / Install Firmware Lenovo VIBE K4 NOTE.
Then, click download button on top right and connect your Lenovo VIBE K4 NOTE with USB cable in phone switch off position.

Flash / Install Firmware Lenovo VIBE K4 NOTE.
Process will run automatic, and you can see the red stripe showing download percentage at bellow
When your process complete, you can see a green circle with tick mark.
Flash / Install Firmware Lenovo VIBE K4 NOTE.
Now disconnect your Lenovo VIBE K4 NOTE
Then, start your Lenovo VIBE K4 NOTE. (remember, on the first booting it will take a long time to start)
Success. enjoy.